Key Technical Deltas & Mission Envelopes
+9,400 kg
Airbus A220-300 (70,900 kg) vs Embraer E195-E2 (61,500 kg). Structural maximum weight dictates certified runway length requirements and navigation airspace fee calculations.
+1,482 km
Airbus A220-300 reaches 6,297 km, while Embraer E195-E2 achieves 4,815 km under mandatory ETOPS reserve fuel rules.
+10 seats
130 passengers aboard Airbus A220-300 compared to 120 in Embraer E195-E2, governing revenue seat-kilometer generation and cabin aisle ergonomics.
+-0.0 m
35.1 m (Airbus A220-300) versus 35.12 m (Embraer E195-E2), governing ICAO Aerodrome Reference Code gate docking boundaries.
| Aeronautical Metric | Airbus A220-300 | Embraer E195-E2 | Comparative Delta |
|---|---|---|---|
| Maximum Takeoff Weight (MTOW) | 70,900 kg | 61,500 kg | +9,400 kg |
| Maximum Payload Range | 6,297 km | 4,815 km | +1,482 km |
| Wingspan Geometry | 35.1 m | 35.12 m | +-0.0 m |
| Typical 2-Class Passenger Seating | 130 seats | 120 seats | +10 seats |
| Transonic Cruise Speed | Mach 0.78 | Mach 0.78 | 0.00 |
Aerodynamic Architecture & Propulsion Metrology
Aerodynamic Efficiency & Wing Planform Optimization
When contrasting the Airbus A220-300 against the Embraer E195-E2, aerodynamic configuration represents the primary determinant of transonic cruise efficiency. The Airbus A220-300 exhibits a wingspan of 35.1 meters with optimized wing sweep, designed to delay Mach shockwave formation across the upper airfoil surface. In comparison, the Embraer E195-E2 features an aerodynamic span of 35.12 meters, engineered with specialized wingtip devices to attenuate induced vortex drag. Modern high-aspect-ratio wing designs lower fuel consumption by preserving laminar boundary-layer flow and mitigating drag-divergence Mach penalties during long-range cruise regimes at FL350 to FL410.
Supercritical aerofoil sections delay boundary layer separation at transonic Mach numbers, flattening the upper wing pressure distribution to minimize wave drag. Computational fluid dynamics (CFD) optimizations across both airframes govern lift-to-drag ratios during high-altitude cruise, directly translating to thousands of kilograms in fuel burn divergence across typical 5,000 nautical mile mission profiles. Aerodynamic wing-to-body fairings smoothly blend fuselage contours to suppress interference drag throughout critical climb regimes.
Propulsion Architecture & Thrust-to-Weight Dynamics
Turbofan powerplant selection governs thermodynamic efficiency and operational climb gradients. The Airbus A220-300 utilizes Pratt & Whitney PW1524G (2x) engines generating 108.5 kN of takeoff thrust per nacelle, resulting in a certified thrust-to-weight ratio of 0.312. Conversely, the Embraer E195-E2 is powered by Pratt & Whitney PW1900G (2x) powerplants delivering 102.3 kN each with a thrust-to-weight ratio of 0.339. Higher bypass ratios reduce specific fuel consumption and engine noise acoustic signatures, enabling full compliance with ICAO Chapter 14 noise standards while assuring second-segment climb gradient margins during single-engine failure scenarios.
Full Authority Digital Engine Control (FADEC) governs turbine blade thermal cycles and variable bleed valve scheduling, maximizing thermodynamic Brayton cycle efficiency. Automated thrust derate capabilities protect turbine hot sections during takeoff from sea-level runways, reducing life-limited part replacement cycles and minimizing unscheduled engine removals. Certified single-engine drift-down ceilings guarantee positive obstacle clearance over high mountain ranges during en-route depressurization or powerplant shutdown.
Certified Flight Deck Dispatch Compliance
Operating Economics, CASK & Ramp Ground Compatibility
Payload-Range Trade-Off & Available Seat-Kilometer Economics
Airline fleet planning hinges upon the mathematical trade-off between payload weight and maximum sector distance. The Airbus A220-300 provides a maximum structural payload of 18,700 kg alongside a maximum fuel capacity of 21,805 liters. In head-to-head route dispatch modeling, the Embraer E195-E2 accommodates 16,150 kg of payload with a fuel volume of 16,000 liters. Cost per Available Seat-Kilometer (CASK) favors whichever airframe achieves superior structural weight fraction and lower maintenance per block hour, providing dispatch flexibility across diverse high-density stage lengths.
Revenue Seat-Kilometer (RSK) optimization requires evaluating passenger cabin comfort tiers, galley locations, and lavatory monuments. Composite airframe structures allow higher cabin humidity levels (up to 15%) and lower effective cabin altitudes (6,000 feet instead of 8,000 feet), substantially reducing passenger fatigue on long-haul missions. Underfloor cargo volume configured for standardized LD3 unit load devices (ULD) generates vital auxiliary belly-freight revenue across international long-haul corridors.
Airport Infrastructure & Ramp Ground Compatibility
Ground handling logistics and airport apron compatibility are strictly determined by physical dimensions. The Airbus A220-300 measures 38.7 meters in length and 11.5 meters in empennage height, demanding specific gate clearances and turnaround ground support equipment. The Embraer E195-E2, with a length of 41.5 meters and tail height of 10.95 meters, impacts pavement loading through its certified Main Landing Gear footprint. Both airframes require careful alignment with airport jet bridge docking systems, fuel hydrant supply flowrates, and runway pavement classification ratings (PCR/ACR) under current FAA and EASA aerodrome operating directives.
Turnaround efficiency directly impacts daily aircraft utilization. Multi-wheel landing gear arrangements distribute certified gross takeoff weight across flexible and rigid pavements, preventing structural subgrade fatigue while ground servicing vehicles complete synchronized cargo loading, water servicing, and pre-conditioned air delivery.
Certified Flight Deck Hardware & Avionics Controllers
Thrustmaster TCA Captain Pack Airbus Edition
Ergonomic side-stick replica and dual-engine quadrant with operational reverser mechanism for A320neo, A321XLR, and A350 simulation.
View Airbus Sidestick & Quadrant ➔Honeycomb Aeronautical Bravo Throttle Quadrant
Universal multi-engine flight console with commercial airliner autopilot annunciator panel and configurable levers.
Explore Honeycomb Throttle Console ➔
How does the Airbus A220-300 compare to the Embraer E195-E2 in flight range?
The Airbus A220-300 achieves a maximum certified payload range of 6,297 km (3,400 nmi), compared to 4,815 km (2,600 nmi) on the Embraer E195-E2, a mission delta of 1,482 km.
Which aircraft offers higher maximum certified takeoff weight?
The Airbus A220-300 holds the higher certified Maximum Takeoff Weight at 70,900 kg, versus 61,500 kg on the Embraer E195-E2.